Experimental Researches Regarding the Distribution of the Deformations on Incremental Formed Parts

Ionuţ Moise Chera; Octavian Bologa

doi:10.1515/aucts-2015-0003

.blurhash-client-img { display: none !important; }

Experimental Researches Regarding the Distribution of the Deformations on Incremental Formed Parts

Acta Universitatis Cibiniensis. Technical Series

Volume 65 (2014): Issue 1 (December 2014)

By: Ionuţ Moise Chera and Octavian Bologa

Open Access

|Mar 2015

Abstract

The goal of this research is to present results regarding the variation of the deformations on the surface of the incremental formed parts. The experiments were performed on a custom layout by means of a KUKA industrial robot and the measurement of the sheet metal deformations was done using ARAMIS optical measurement system. The custom layout allows for the measurement of the deformations to take place during the actual forming process

References

Ambrogio, G., De Napoli, L., Filice, L., Gagliardi, F., (2005) Application of Incremental Forming process for high customized medical product manufacturing, Journal of Materials Processing Technology, p. 156-162.
Search in Google Scholar
Cofaru, N., Oleksik, V., Pascu, A., (2008) Finite element simulations regard different alternatives of the single point incremental forming process, Proceedings of the 1st Wseas International Conference on Visualization, Imaging and Simulation, Bucharest, Romania, p. 167-172.
Search in Google Scholar
Hagan, E., Jeswiet, J., (2003) A review of conventional and modern single-point sheet metal forming methods, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 217, p. 213-225.
Search in Google Scholar
Jeswiet, J., Micari, F., Hirt, G., Bramley, A., Duflou, J., Allwood, J., (2005) Asymmetric single point incremental forming of sheet metal, CIRP Annals Manufacturing Technology Volume 54, Issue 2, p. 623-650.
Search in Google Scholar
Meier, H., Buff, B., Laurischkat, R., Smukala, V., (2009) Increasing the part accuracy in dieless robot-based incremental sheet metal forming, CIRP Annals - Manufacturing Technology 58, p. 233-238.
Search in Google Scholar
Oleksik, V., Pascu, A., Deac, C., Fleaca, R., Roman, M., (2009) Numerical Simulation of the Incremental Forming Process for Knee Implants, Proc. X International Conference on Computational Plasticity, Fundamental and Applications.
Search in Google Scholar
Oleksik, V., Pascu, A., Găvruş, A., Oleksik, M., (2010) Experimental studies regarding the single point incremental forming process, Academic Journal of Manufacturing Engineering, Vol. 8, No. 2, p. 51-56.
Search in Google Scholar
Rauch, M., (2009) Tool path programming optimization for incremental sheet forming applications, Computer-Aided Design 41, p. 877-885.
Search in Google Scholar
Sasso, M., Callegari, M., Amodio, D., (2008) Incremental forming: an integrated robotized cell for production and quality control, Meccanica 43, p. 153-163.
Search in Google Scholar
Schafer, T., Schraft, R.D., (2005) Incremental sheet metal forming by industrial robots, Rapid Prototyping Journal 11/5, p. 278-286.
Search in Google Scholar
Vihtonen, L., Puzik, A., Katajarinne, T., (2008) Comparing Two Robot Assisted Incremental Forming Methods: Incremental Forming by Pressing and Incremental Hammering, Int J Mater Form, Suppl. 1, p.1207 -1210
Search in Google Scholar

Articles in this issue

DOI: https://doi.org/10.1515/aucts-2015-0003 | Journal eISSN: 2668-6449 | Journal ISSN: 1583-7149

Journal RSS Feed

Language: English

Page range: 13 - 19

Published on: Mar 3, 2015

Published by: Lucian Blaga University of Sibiu

In partnership with: Paradigm Publishing Services

Publication frequency: 1 issue per year

Keywords:

incremental sheet metal forming,

industrial robot,

strains,

optical measuring system

Related subjects:

Engineering,

Electrical engineering,

Automation,

Mechanical engineering,

Production technology,

Process engineering and industrial engineering

© 2015 Ionuţ Moise Chera, Octavian Bologa, published by Lucian Blaga University of Sibiu
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Volume 65 (2014): Issue 1 (December 2014)