The Results on Metal Surface Micro Geometry Modification by Applying Electric Discharges in Impulse

Dorin Guzgan

doi:10.1515/aucts-2015-0006

.blurhash-client-img { display: none !important; }

The Results on Metal Surface Micro Geometry Modification by Applying Electric Discharges in Impulse

Acta Universitatis Cibiniensis. Technical Series

Volume 65 (2014): Issue 1 (December 2014)

By: Dorin Guzgan

Open Access

|Mar 2015

Abstract

The experimental results aimed at modification of metal surface micro geometry by applying electric discharges in impulse are presented in this paper. Taylor cone-shaped asperities were extracted from the metal piece on the flat and cylindrical surface. SEM and EDX analysis of the processed surfaces were investigated

References

Gabovich, M. D. (1983). Liquid metallic ion emitters. Advances of Physical Sciences. Vol. 140. Issue 1, pp. 137-151.
Search in Google Scholar
Gabovich, M. D.; Praznyi, V. Ya. (1983). On the mechanism of excitation of nonlinear capillary waves on the surface of the liquid metal in contact with the ion plasma. Journal of Experimental and Theoretical Physics. Vol. 85, issue 1, рр. 146.
Search in Google Scholar
Grigoriev, A. I.; Shiryaeva, S. O.; Belonozhko, D. F.; Klimov, A. V. (2004). About Taylor cone shape and characteristic time of its growth. Electronic processing of materials, No. 4, Chisinau, pp. 34-40.
Search in Google Scholar
Luban, R. B.; Pecker, L. S.; Galinov, I. V. (1990). About a possible mechanism of material transfer from the anode to the cathode at electro-spark alloying of metals. Electronic processing of materials. No. 5, pp. 13-14.
Search in Google Scholar
Topală, P. (2007). Electrical charges as measure for removed metal mass the electrical discharge machining. Iasi: Edition PIM, Nonconventional Technologies Review, No. 4, pp. 103-108.
Search in Google Scholar
Topală, P.; Stoicev, P., (2008). Conductive material processing technologies by applying electrical discharges in impulse. Chisinau: Edition „Tehnica-INFO”, 265 pр.
Search in Google Scholar
Stavitskii, V. I. (2001). Precision electro-spark material processing. Scientific basis of precise shaping of material surfaces. Electronic processing of materials, No. 6, Chisinau, pp. 5-32.
Search in Google Scholar
Topală, P., Dushenko, V., Gitlevich, A., (1990). On the conditions of surface melt formation on the piece-cathode during electro-spark alloying at “Razread” type installations. Electronic processing of materials, No. 6, Chisinau, pp. 17-18.
Search in Google Scholar
Topală, P., Rusnac V., Guzgan, D. Increasing the thermoelectric capacity of emission in cathodes by modifying their surface microgeometry. The 16th International Conference Inventica 2012, June 13-15, 2012, Iasi, Romania. Edition Performantica, National Institute of Inventica, Iasi. pp. 623-624. ISSN 1844-7880.
Search in Google Scholar
Topală, P., Guzgan, D. Formation of electronic thermo-emission surfaces via micro-geometry modification under conditions of applying EDI plasma. Proceedings of the 17th International Conference ModTech - New face of TMCR, 2013. Sinaia, Romania. ISSN 2066-3919.
Search in Google Scholar