UOE Pipe Manufacturing Process Simulation: Equipment Designing and Construction

Dmitri Delistoian; Mihael Chirchor

doi:10.1515/aucts-2017-0013

.blurhash-client-img { display: none !important; }

UOE Pipe Manufacturing Process Simulation: Equipment Designing and Construction

Acta Universitatis Cibiniensis. Technical Series

Volume 69 (2017): Issue 1 (December 2017)

By: Dmitri Delistoian and Mihael Chirchor

Open Access

|Jan 2018

Abstract

UOE pipe manufacturing process influence directly on pipeline resilience and operation capacity. At present most spreaded pipe manufacturing method is UOE. This method is based on cold forming. After each technological step appears a certain stress and strain level. For pipe stress strain study is designed and constructed special equipment that simulate entire technological process.UOE pipe equipment is dedicated for manufacturing of longitudinally submerged arc welded DN 400 (16 inch) steel pipe.

References

1. EuroPipe - Mulheim Pipecoatings, UOE pipe manufacturing process, http://www.europipe.com/products/manufacturing-process/, Mülheim an der Ruhr, Germany, (2016). (Accessed 10/06/2016)
Search in Google Scholar Back to article
2. Adlan-Wan, Nawang Wan, An experimental study on the springback in bending of w-shaped micro sheet-metal parts, MATEC Web of Conferences 21, 09015,pp 1-2, Les Ulis, France (2015).10.1051/matecconf/20152109015
Search in Google Scholar Back to article
3. Tomasz Trzepiecinski, Effect of Computational Parameters on Springback Prediction by Numerical Simulation, Metals, MDPI, pp 1-2, Basel, Switzerland, (2017).10.3390/met7090380
Search in Google Scholar Back to article
4. Jack Hu, John Duncan, Mechanics of the sheet metal forming, Technology and Engineering, Amsterdam, Netherlands (2002).
Search in Google Scholar Back to article
5. Leonid Rudmann, Spravochnik constructora shtampov, Izd. Mashinostroenie, pp 202-204, Moskow, URSS (1988).
Search in Google Scholar Back to article
6. Leonid Rudmann, Spravochnik constructora shtampov, Izd. Mashinostroenie, pp 19-20, Moskow, URSS (1988).
Search in Google Scholar Back to article
7. G. Siempelkamp GmbH & Co. KG, Pipe manufacturing process, http://www.siempelkamp.com/fileadmin/media/Deutsch/Download/Bulletin/bulletin_2005_02.pdf , Krefeld, Germany (2016) (Accessed 12/08/2016)
Search in Google Scholar Back to article
8. Autodesk, AutoCAD 2013 - student version, www.autodesk.com (2015).
Search in Google Scholar Back to article
9. Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments, ASTM A 36 high strength low alloy steel, https://www.astm.org/Standards/A690.htm,West Conshohocken, USA (2016). (Accessed 24/11/2016).
Search in Google Scholar Back to article
10. Water cutting machine, Maxiem 1530, Data sheet, pp 5-6, South Kent, USA (2016).
Search in Google Scholar Back to article
11. EuroPipe - Mulheim Pipecoatings, Large diameter pipes, http://www.europipe.com/products/large-diameter-pipes-line-pipes/, Mülheim an der Ruhr, Germany, (2017). (Accessed 10/12/2016)
Search in Google Scholar Back to article
12. Corus Tubes, Tubes manufacturing, https://www.tatasteeleurope.com/en/products-and-services/long/tube/conveyance /install, London, United Kingdom (2015) (Accessed 12/04/2015)
Search in Google Scholar Back to article
13. Dmitri Delistoian, Studiul numeric si experimental al tensiunilor reziduale din procesul de fabricatie a conductelor magistrale, Raportul de cercetare Nr. 3, Constnta Maritime University, pp 54-55, Constanta, Romania (2017).
Search in Google Scholar Back to article
14. Society of Petrolium Engineers, Strenght of casing and tubing, http://petrowiki.org/Strength_of_casing_and_tubing, Richardson, Texas, USA (2015), (Accessed 25/05/2015).
Search in Google Scholar Back to article
15. X60 steel, Metallurgical certificate Nr. 14/415842, Daewoo International Corporation, Seoul , South Korea (2014).
Search in Google Scholar Back to article
16. Ion Tudose, Rezistenţa materialelor Ed. Didactică şi Pedagogică, pp 320-324, Bucureşti, Romania (1981).
Search in Google Scholar Back to article
17. Ion Tudose, Rezistenţa materialelor Ed. Didactică şi Pedagogică, pp 120-125, Bucureşti, Romania (1981).
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.1515/aucts-2017-0013 | Journal eISSN: 2668-6449 | Journal ISSN: 1583-7149

Journal RSS Feed

Language: English

Page range: 100 - 112

Published on: Jan 11, 2018

Published by: Lucian Blaga University of Sibiu

In partnership with: Paradigm Publishing Services

Publication frequency: 1 issue per year

Keywords:

UOE pipe,

die,

punch,

springback,

strain

Related subjects:

Engineering,

Electrical engineering,

Automation,

Mechanical engineering,

Production technology,

Process engineering and industrial engineering

© 2018 Dmitri Delistoian, Mihael Chirchor, published by Lucian Blaga University of Sibiu
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Volume 69 (2017): Issue 1 (December 2017)