References
- Ansari J.Z., Tekade A.R., Dandekar S.C., Measurement of Concentricity and Runout, Int. J. Emerg. Technol. Adv. Eng., 4 (4), 41-46 (2016).
- Bounchaleun A., An Elementary Introduction to Fast Fourier Transform Algorithms, Available on: https://math.uchicago.edu/~may/REU2019/REUPapers/Bounchaleun.pdf (accessed at 01.07.2025).
- Elerian, F.A., Helal, W.M.K., AbouEleaz M.A., Methods of Roundness Measurement: An Experimental Comparative Study, J. Mech. Eng. Res. Dev., 44 (9), 173-183 (2021).
- Grigoruta (Bisoc) C., Grigoruta L-C., Simon I., Chitariu D-F., Edutanu F-D., Horodinca M., Considerations on the Accuracy and Precision of Machine Tools: A Review, Bul. Inst. Polit. Iași, 71(75) 2, s. Mach. Manuf., 21-35 (2025), DOI: 10.2478/bipcm-2025-0012.
- He D., Wang J., Huang F., Lu C., Separation of Rotary Table Radial Error Motions in Gear Pitch Measurements Using Harmonic Regeneration, Precis. Eng., 82 (2023), 84-92 (2023). Available on: https://doi.org/10.1016/j.precisioneng.2023.01.011.
- Horodinca M., Detection of 2D Cross Section Profile of Rotating Objects Using a 1D Optical Laser Measurement System, Bul. Inst. Polit. Iași, 63(67) 1, s. Mach. Manuf., 9–18 (2017).
- Iacono N., Fontana G., Bianchi G., Lancini M., Design of a Low-cost System for the Measurement of the Radial Displacements of a Cylindrical Metal Target, University of Brescia, 2022, Available on: https://iris.unibs.it/retrieve/e3443ac7-e376-4caa-b8cfb255b87727c0/Nicola_Iacono.pdf (accessed at 27.06.2025).
- Jeong G.B., Kim D.H., Jang D.Y., Real Time Monitoring and Diagnosis System Development in Turning Through Measuring a Roundness Error Based on Three-Point Method, Int. J. Mach. Tools Manuf., 45 (2005), 1494-1503 (2005), Available on: https://doi.org/10.1016/j.ijmachtools.2005.01.022.
- Kavitha C., Denis Ashok S., A New Approach to Spindle Radial Error Evaluation Using a Machine Vision System, Metrol. Meas. Syst. 24 (1), 201-219 (2017), DOI: 10.1515/mms-2017-0018.
- Lee C., Zhao R., Jeon S., A Simple Optical System for Miniature Spindle Runout Monitoring, Measurement, 102, 42-46 (2017), Available on: https://doi.org/10.1016/j.measurement.2017.01.056.
- Li Y., Wan M., Wen D.Y., Zhang W.H., Deep Learning-Based Method for Characterizing the Cutter Runout Phenomenon in Micro Milling, J. Mater. Process. Technol., 321, 118151 (2023), Available on: https://doi.org/10.1016/j.jmatprotec.2023.118151.
- Li W., Li F., Jiang Z., Wang H., Huang Y., Liang Q., Huang M., Li T., Gao X., A Machine Vision–based Radial Circular Runout Measurement Method, Int. J. Adv. Manuf. Technol., 126, 3949-3958 (2023), Available on: https://doi.org/10.1007/s00170-023-11383-4.
- Liu X., Rui X., Mi L., Tang Q., Chen H., Xia Y., Radial Error Motion Measurement and Its Uncertainty Estimation of Ultra Precision Axes of Rotation with Nanometer Level Precision, Micromachines, 13, (2121), (2022).
- Liu X., Zhang X., Shang B., Chi X., Study on Vision-based on Machine Micro Tool Measurement Method, Proc. of the 2015 Joint International Mechanical, Electronic and Information Technology Conference, December 2015, pp. 1076-1080, Atlantis Press. Available on: https://www.atlantis-press.com/proceedings/jimet-15/25843918.
- Munteanu A., Horodinca M., Bumbu N.-E., Dumitras C.G., Chitariu D.-F., Mihai C.-G., Khdair M., Oancea L., A Signal Pattern Extraction Method Useful for Monitoring the Condition of Actuated Mechanical Systems Operating in Steady State Regimes, Sensors, 25, 1119 (2025), Available on: https://doi.org/10.3390/s25041119.
- Ramaswami H., Turek S., Rajmohan S., Anand S., A Comprehensive Methodology for Runout Tolerance Evaluation Using Discrete Data, Int. J. Adv. Manuf. Technol. 56, 663-676 (2011).
- Pei Y.-C., Xie H.-L., Tan Q.-C., A Non-contact High Precision Measuring Method for the Radial Runout of Cylindrical Gear Tooth Profile, Mech. Syst. Signal Process., 138, 106543 (2020), Available on: https://doi.org/10.1016/j.ymssp.2019.106543.
- Verma N., Wahi P., Law M., Vision-based Runout Measurement Method for End Mills, Proc. of the 9th International & 30th All India Manufacturing Technology, Design and Research Conference, AIMTDR 2023, Indian Institute of Technology Kanpur (2023), Available on: https://home.iitk.ac.in/~mlaw/Verma-AIMTDR-2023.pdf.
- Zhang M., Liu D., Liu Y., Recent Progress in Precision Measurement and Assembly Optimization Methods of the Aero-Engine Multistage Rotor: A Comprehensive Review, Measurement, 235, 114990 (2024), Available on: https://doi.org/10.1016/j.measurement.2024.114990.
- Yang G., Wang Y., Three-dimensional Measurement of Precise Shaft Parts Based on Line Structured Light and Deep Learning, Measurement, 190, 110837 (2022), Available on: https://doi.org/10.1016/j.measurement.2022.110837.
- Ye Y., Li H., Wang Q., Li F., Yi C., Peng X., Huang C., Zeng J., Fault Diagnosis of Railway Wheelsets: A Review, Measurement, 242, 116169 (2024), Available on: https://doi.org/10.1016/j.measurement.2024.116169.
- *** ISO 1101:2017 Geometrical Product Specifications (GPS) – Geometrical Tolerancing - Tolerances of Form, Orientation, Location and Run-out (2017), Available on: https://www.iso.org/standard/66777.html (accessed at 28.06.2025).
- *** What is Runout & Total Runout, Available on: https://kapent.com/understanding-runout-in-rotating-machinery/ (accessed at 28.06.2025).
- *** Optical sensor ILD 2000 Series Instruction Manual, Available on: https://www.img.ufl.edu/wiki/images/ILD_2000_Datasheet.pdf (accessed on 29.06.2025).
- *** PicoScope 4424, Data Sheets, Available on: https://www.tequipment.net/Pico/4424/PC-Based-Oscilloscopes/.