References
- Berge J., Introduction to Fieldbuses for Process Control, Copyright © 2002 ISA - The Instrumentation, Systems, and Automation Society, ISA.
- Chun-ming Z., Ru-jiang G., Dan-li W., Yan-min X., Chen Min, Jin Cheng, The Design of Bulk Carrier Cargo Holds State Integrated Monitoring System, School of Navigation, Wuhan University of Technology, Wuhan, China, MATEC Web of Conferences 61, 07014 (2016).10.1051/matecconf/20166107014
- Dudojc B., Mindykowski J., Analysis of Selected Properties of Measurement Channels Used in Hazardous Areas of Ships, IEEE Instrumentation and Measurement Technology Conference, Brussels, Belgium, 1996, IMTC Proceedings, Volume II, 826-831.
- Dudojc B., Mindykowski J., Checking Current Analog Measurement Channels, Proc. of the IMEKO TC-4 Conference, Vienna, 2000, 175-180.
- Dudojc B., Mindykowski J., New Approach to Analysis of Selected Measurement and Monitoring Systems Solutions in Ship Technology, Sensor 2019 (8), 1775.10.3390/s19081775651509231013903
- Felser M., PROFIBUS Manual, Edition 1.2.4 published at 25. August 2017.
- Frantloviu M.P., Jovanov V.J., MiljkoviüB L.J., Intelligent Industrial Transmitters of Pressure and Other Process Parameters, Telfor Journal, Vol. 1, No. 2, 2009.
- Gingerich K., Device Spacing on RS-485 Buses, Texas Instruments Analog Applications Journal, 2Q 2006.
- Kugelstadt T., The RS-485 Design Guide, Application Report SLLA272C–February 2008–Revised May 2021, Texas Instruments, Copyright © 2021, Texas Instruments Incorporated.
- Liptak B.G., Halit E., Instrument Engineers’ Handbook, Process Software and Digital Networks Volume III, 4th Edition, International Society of Automation, CRC Press Taylor and Francis Group © 2012, 578-635.
- Liptak B.G, Instrument Engineers’ Handbook, Process and Control Optimization Volume II, 4th Edition, International Society of Automation, CRC Press Taylor and Francis Group © 2006, 561-574, 690-692, 780-784
- Liptak B.G., Instrument Engineers’ Handbook, Process Measurement and Analysis Volume I, 4th Edition, International Society of Automation, CRC Press Taylor and Francis Group © 2003, 549-55410.1201/9781420064025
- Liptak B.G., Vinczel K., Instrument and Automation Engineers’ Handbook, Measurement and Safety Volume I, 5th Edition, International Society of Automation, CRC Press Taylor and Francis Group © 2017, 1171-1177, 1883-1888
- Mackay S., Wright E., Park J., Practical Data Communications for Instrumentation and Control, 1st edition, 11 June 2003, 3-67, 205-238, 240-287.
- Marais H., RS-485/RS-422 Circuit Implementation Guide, AN-960 Application Note, 2008.
- Mehta B.R., Reddy Y.J., Industrial Process Automation Systems Design and Implementation, Butterworth-Heinemann is an imprint of Elsevier, Copyright © 2015 Elsevier Inc.16-20, 306-339, 365-415.
- Snyder D.A., Understanding 4 to 20 mA Loops, PDH Course E271, PE, 2008.
- Sonnenberg J., Serial Communications RS232, RS485, RS422, Copyright 2018.
- Verhappen I., Pereira A., Foundation Fieldbus, Fourth Edition, International Society of Automation; 4th edition (February 29, 2012)
- *** Modbus IDA, Modbus Application Protocol Specification, V1.1b, Modbus IDA, December 28, 2006.
- *** Modbus IDA, Modbus Over Serial Line Specification and Implementation Guide V1.02, Modbus.org, Dec 20, 2006.
- *** PROFIBUS & PROFINET International (PI), PROFIBUS System Description Technology and Application, Version April 2016.