References
- Han, F., Wang, J., Ding, L., Hu, Y., Li, W., Yuan, Z., ... & Li, B. (2020). Tissue engineering and regenerative medicine: achievements, future, and sustainability in Asia. Frontiers in bioengineering and biotechnology, 8, 83. doi: 10.3389/fbioe.2020.00083
- Farag, M. M. (2023). Recent trends on biomaterials for tissue regeneration applications. Journal of Materials Science, 1-32, DOI 10.1007/s10853-022-08102-x
- Adel, I. M., ElMeligy, M. F., & Elkasabgy, N. A. (2022). Conventional and recent trends of scaffolds fabrication: a superior mode for tissue engineering. Pharmaceutics, 14(2), 306. https://doi.org/10.3390/pharmaceutics14020306
- Wang, H., Su, K. X., Su, L. Z., Liang, P. P., Ji, P., and Wang, C. (2019). Comparison of 3D-printed porous tantalum and titanium scaffolds on osteointegration and osteogenesis. Mater. Sci. Eng. C-Mater. Biol. Appl. 104:109908. doi: 10.1016/j.msec.2019.109908
- Tsakiris, V., Tardei, C., & Clicinschi, F. M. (2021). Biodegradable Mg alloys for orthopedic implants–A review. Journal of Magnesium and Alloys, 9(6), 1884-1905, https://doi.org/10.1016/j.jma.2021.06.024
- An, Y., Wei, W., Jing, H., Ming, L., Liu, S., and Jin, Y. (2015). Bone marrow mesenchymal stem cell aggregate: an optimal cell therapy for full-layer cutaneous wound vascularization and regeneration. Sci. Rep. 5:17036. doi: 10.1038/srep17036
- Ye, K., Kuang, H., You, Z., Morsi, Y., and Mo, X. (2019). Electrospun nanofibers for tissue engineering with drug loading and release. Pharmaceutics 11:182.doi: 10.3390/pharmaceutics11040182
- Picciolo, G., Peditto, M., Irrera, N., Pallio, G., Altavilla, D., Vaccaro, M., ... & Oteri, G. (2020). Preclinical and Clinical Applications of Biomaterials in the Enhancement of Wound Healing in Oral Surgery: An Overview of the Available Reviews. Pharmaceutics, 12(11), 1018, DOI 10.3390/pharmaceutics12111018
- Cho, K. H., Uthaman, S., Park, I. K., & Cho, C. S. (2018). Injectable biomaterials in plastic and reconstructive surgery: a review of the current status. Tissue engineering and regenerative medicine, 15, 559-574. DOI 10.1007/s13770-018-0158-2
- Yan, Y. F., Cheng, B. C., Chen, K. Z., Cui, W. G., Qi, J., Li, X. M., et al. (2019). Enhanced osteogenesis of bone marrow-derived mesenchymal stem cells by a functionalized silk fibroin hydrogel for bone defect repair. Adv. Healthc. Mater. 8:e1801043. doi: 10.1002/adhm.201801043
- Han, F., Hu, Y., Li, J., Gong, J., Guo, Q., Zhu, C., et al. (2019). In situ silk fibroinmediated crystal formation of octacalcium phosphate and its application in bone repair. Mater. Sci. Eng. C 95, 1–10. doi: 10.1016/j.msec.2018.10.041
- Zhang, X. Z., Zu, H. Y., Zhao, D. W., Yang, K., Tian, S. M., Yu, X. M., et al. (2017) Ion channel functional protein kinase TRPM7 regulates Mg ions to promote the osteoinduction of human osteoblast via PI3K pathway: in vitro simulation of the bone-repairing effect of Mg-based alloy implant. Acta Biomater. 63, 369–382. doi: 10.1016/j.actbio.2017.08.051
- Wang, F. Q., Wang, L., Feng, Y. F., Yang, X. J., Ma, Z. S., Shi, L., et al. (2018). Evaluation of an artificial vertebral body fabricated by a tantalum-coated porous titanium scaffold for lumbar vertebral defect repair in rabbits. Sci. Rep. 8:8927.doi: 10.1038/s41598-018-27182-x
- Gao, F., Xu, Z. Y., Liang, Q. F., Liu, B., Li, H. F., Wu, Y. H., et al. (2018). Direct 3D printing of high strength biohybrid gradient hydrogel scaffolds for efficient repair of osteochondral defect. Adv. Funct. Mater. 28, 13. doi: 10.1002/adfm.201706644
- M. Long and H.J. Rack, Titanium Alloys in Total Joint Replacement—A Materials Science Perspective, Biomaterials, 19 (1998) p 1621–1639, https://doi.org/10.1016/S0142-9612(97)00146-4
- M. Niculescu, D. Laptoiu, F. Miculescu, I.V. Antoniac, (2015) Metal Allergy and other Adverse Reactions in Patients with Total Hip Replacement, Advanced Materials Research 1114 283-287. https://doi.org/10.4028/www.scientific.net/AMR.1114.283
- Ganbold, B., Heo, S. J., Koak, J. Y., Kim, S. K., and Cho, J. (2019). Human stem cell responses and surface characteristics of 3D printing Co-Cr dental material. Materials 12:E3419. doi: 10.3390/ma12203419
- Sun, Y. S., Huang, C. Y., Chen, C. S., Chang, J. H., Hou, W. T., Li, S. J., et al. (2018). Bone cell responses to a low elastic modulus titanium alloy surface immobilized with the natural cross-linker genipin. Surf. Coat. Technol. 350, 918–924. doi: 10.1016/j.surfcoat.2018.03.069
- Ye, K. Q., Liu, D. H., Kuang, H. Z., Cai, J. Y., Chen, W. M., Sun, B. B., et al. (2019). Three-dimensional electrospun nanofibrous scaffolds displaying bone morphogenetic protein-2-derived peptides for the promotion of osteogenic differentiation of stem cells and bone regeneration. J. Colloid Interface Sci. 534, 625–636. doi: 10.1016/j.jcis.2018.09.071
- Popescu, I. N., Vidu, R., & Bratu, V. (2017). Porous Metallic Biomaterials Processing (Review) Part 1: Compaction, Sintering Behavior, Properties And Medical Applications. Scientific Bulletin of'Valahia'University. Materials & Mechanics, 15(13).
- Cotrut, C. M., Ionescu, I. C., Ungureanu, E., Berbecaru, A., Zamfir, R. I., Vladescu, A., & Vranceanu, D. M. (2021). Evaluation of surface modification techniques on the ability of apatite formation and corrosion behavior in synthetic body fluid: An in vitro study. Surfaces and Interfaces, 22, 100866. https://doi.org/10.1016/j.surfin.2020.100866
- Hirsch, M., Lucherini, L., Zhao, R., Saracho, A. C., & Amstad, E. (2023). 3D printing of living structural biocomposites. Materials Today, 62, 21-32. https://doi.org/10.1016/j.mattod.2023.02.001
- Avram, D., Ungureanu, D. N., Ionita, I., Popescu, E. C., & Avram, C. C. (2023, March). Evaluation of the antibacterial activity of some doped phosphocalcic glasses with silver and copper. In Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies XI (Vol. 12493, pp. 29-34). SPIE. https://doi.org/10.1117/12.2642095
- Cotrut, C. M., Ungureanu, E., Ionescu, I. C., Zamfir, R. I., Kiss, A. E., Parau, A. C., ... & Saceleanu, A. (2022). Influence of Magnesium Content on the Physico-Chemical Properties of Hydroxyapatite Electrochemically Deposited on a Nanostructured Titanium Surface. Coatings, 12(8), 109, https://doi.org/10.3390/coatings12081097 .
- Sánchez-Salcedo, S., García, A., González-Jiménez, A., & Vallet-Regí, M. (2023). Antibacterial effect of 3D printed mesoporous bioactive glass scaffolds doped with metallic silver nanoparticles. Acta Biomaterialia, 155, 654-666. https://doi.org/10.1016/j.actbio.2022.10.045
- Xie, P., Du, J., Li, Y., Wu, J., He, H., Jiang, X., et al. (2019). Robust hierarchical porous MBG scaffolds with promoted biomineralization ability. Colloids Surf. B Biointerfaces 178, 22–31. doi: 10.1016/j.colsurfb.2019.02.042
- Yang, C., Wang, X., Ma, B., Zhu, H., Huan, Z., Ma, N., et al. (2017). 3D-Printed bioactive Ca3SiO5 bone cement scaffolds with nano surface structure for bone regeneration. ACS Appl. Mater. Interfaces 9, 5757–5767. doi: 10.1021/acsami.6b14297
- Bunpetch, V., Zhang, X., Li, T., Lin, J., Maswikiti, E. P., Wu, Y., et al. (2019). Silicate-based bioceramic scaffolds for dual-lineage regeneration of osteochondral defect. Biomaterials 192, 323–333. doi: 10.1016/j.biomaterials.2018.11.025
- Chen, Y., Wang, J., Zhu, X. D., Tang, Z. R., Yang, X., Tan, Y. F., et al. (2015).Enhanced effect of beta-tricalcium phosphate phase on neovascularization of porous calcium phosphate ceramics: in vitro and in vivo evidence. Acta Biomater. 11, 435–448. doi: 10.1016/j.actbio.2014.09.028
- Fujiki, M., Abe, K., Hayakawa, T., Yamamoto, T., Torii, M., Iohara, K., et al. (2019). Antimicrobial activity of protamine-loaded calcium phosphates against oral bacteria. Materials 12:E2816. doi: 10.3390/ma12172816
- Hiromoto, S., and Yamazaki, T. (2017). Micromorphological effect of calcium phosphate coating on compatibility of magnesium alloy with osteoblast. Sci.Technol. Adv. Mater. 18, 96–109. doi: 10.1080/14686996.2016.1266238
- Horiuchi, S., Hiasa, M., Yasue, A., Sekine, K., Hamada, K., Asaoka, K., et al. (2014). Fabrications of zinc-releasing biocement combining zinc calcium phosphate to calcium phosphate cement. J. Mech. Behav. Biomed. Mater. 29, 151–160.doi: 10.1016/j.jmbbm.2013.09.005
- Liu, F., Chen, Q. H., Liu, C., Ao, Q., Tian, X. H., Fan, J., et al. (2018).Natural polymers for organ 3D bioprinting. Polymers 10:26. doi: 10.3390/polym10111278
- Zhang, Y. B., Liu, X. C., Zeng, L. D., Zhang, J., Zuo, J. L., Zou, J., et al. (2019).Polymer fiber scaffolds for bone and cartilage tissue engineering. Adv. Funct.Mater 29:1903279. doi: 10.1002/adfm.201903279
- Kalirajan, C., Dukle, A., Nathanael, A. J., Oh, T. H., & Manivasagam, G. (2021). A Critical Review on Polymeric Biomaterials for Biomedical Applications. Polymers, 13(17), 3015., https://doi.org/10.3390/polym13173015
- Yuan, Z., Tao, B. L., He, Y., Liu, J., Lin, C. C., Shen, X. K., et al. (2019). Biocompatible MoS2/PDA-RGD coating on titanium implant with antibacterial property via intrinsic ROS-independent oxidative stress and NIR irradiation. Biomaterials 217:119290. doi: 10.1016/j.biomaterials.2019.119290
- Yuan, Z., Tao, B. L., He, Y., Mu, C. Y., Liu, G. H., Zhang, J. X., et al. (2019). Remote eradication of biofilm on titanium implant via near-infrared light triggered photothermal/photodynamic therapy strategy. Biomaterials 223:119479. doi: 10.1016/j.biomaterials.2019.119479
- Alvarez, K., and Nakajima, H. (2009). Metallic scaffolds for bone regeneration. Materials 2, 790–832. doi: 10.3390/ma2030790
- Lin, Z., Zhao, Y., Chu, P. K., Wang, L., Pan, H., Zheng, Y., et al. (2019). A functionalized TiO2/Mg2TiO4 nano-layer on biodegradable magnesium implant enables superior bone-implant integration and bacterial disinfection. Biomaterials 219:119372. doi: 10.1016/j.biomaterials.2019.119372
- Morinaga, K., Sasaki, H., Park, S., Hokugo, A., Okawa, H., Tahara, Y., et al. (2019). Neuronal PAS domain 2 (Npas2) facilitated osseointegration of titanium implant with rough surface through a neuroskeletal mechanism. Biomaterials 192, 62–74. doi: 10.1016/j.biomaterials.2018.11.003
- Okuzu, Y., Fujibayashi, S., Yamaguchi, S., Yamamoto, K., Shimizu, T., Sono, T., et al. (2017). Strontium and magnesium ions released from bioactive titanium metal promote early bone bonding in a rabbit implant model. Acta Biomater.63, 383–392. doi: 10.1016/j.actbio.2017.09.019
- Arifvianto, B., & Zhou, J. (2014). Fabrication of metallic biomedical scaffolds with the space holder method: a review. Materials, 7(5), 3588-3622.doi: 10.3390/ma7053588
- Chen, Y., Kawazoe, N., and Chen, G. (2018). Preparation of dexamethasoneloaded biphasic calcium phosphate nanoparticles/collagen porous composite scaffolds for bone tissue engineering. Acta Biomater. 67, 341–353. doi: 10.1016/j.actbio.2017.12.004
- Kang, Z., Zhang, X., Chen, Y., Akram, M. Y., Nie, J., and Zhu, X. (2017).Preparation of polymer/calcium phosphate porous composite as bone tissue scaffolds. Mater. Sci. Eng C 70, 1125–1131. doi: 10.1016/j.msec.2016.04.008
- Liu, H. H., Yang, L., Zhang, E. C., Zhang, R., Cai, D. D., Zhu, S. A., et al. (2017).Biomimetic tendon extracellular matrix composite gradient scaffold enhances ligament-to-bone junction reconstruction. Acta Biomater. 56, 129–140. doi: 10.1016/j.actbio.2017.05.027
- Yuan, L., Li, B., Yang, J., Ni, Y., Teng, Y., Guo, L., et al. (2016). Effects of composition and mechanical property of injectable collagen I/II composite ydrogels on chondrocyte behaviors. Tissue Eng. Part A 22, 899–906. doi: 10.1089/ten.TEA.2015.0513
- Sivaraj, D., and Vijayalakshmi, K. (2019). Enhanced antibacterial and corrosion resistance properties of Ag substituted hydroxyapatite/functionalized multiwall carbon nanotube nanocomposite coating on 316L stainless steel for biomedical application. Ultrason. Sonochem. 59, 104730. doi: 10.1016/j.ultsonch.2019.104730
- Vyavahare, S., Mahesh, V., Mahesh, V., & Harursampath, D. (2022). Additively manufactured meta-biomaterials: A state-of-the-art review. Composite Structures, 116491, DOI 10.1016/j.compstruct.2022.116491
- Igami, T., Nakamura, Y., Oda, M., Tanaka, H., Nojiri, M., Ebata, T., et al. (2018).Application of three-dimensional print in minor hepatectomy following liver partition between anterior and posterior sectors. ANZ J. Surg. 88, 882–885.doi: 10.1111/ans.14331
- Lee, S. H., and Jun, B. H. (2019). Advances in dynamic microphysiological organon- a-chip: design principle and its biomedical application. J. Ind. Eng. Chem. 71, 65–77. doi: 10.1016/j.jiec.2018.11.041
- Yang, W. E., and Huang, H. H. (2019). Multiform TiO2 nano-network enhances biological response to titanium surface for dental implant applications. Appl. Surf. Sci. 471, 1041–1052. doi: 10.1016/j.apsusc.2018.11.244
- Mour, M., Das, D., Winkler, T., Hoenig, E., Mielke, G., Morlock, M. M., & Schilling, A. F. (2010). Advances in porous biomaterials for dental and orthopaedic applications. Materials, 3(5), 2947-2974, https://doi.org/10.3390/ma3052947
- Md Yusop, A. H., Al Sakkaf, A., & Nur, H. (2022). Modifications on porous absorbable Fe-based scaffolds for bone applications: A review from corrosion and biocompatibility viewpoints. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 110(1), 18-44, https://doi.org/10.1002/jbm.b.34893
- Zhang, C., Li, X. M., Liu, S. Q., Liu, H., Yu, L. J., & Liu, L. (2019). 3D printing of Zr-based bulk metallic glasses and components for potential biomedical applications. Journal of Alloys and Compounds, 790, 963-973, https://doi.org/10.1016/j.jallcom.2019.03.275
- Ishfaq, K., Rehman, M., Khan, A. R., & Wang, Y. (2022). A review on the performance characteristics, applications, challenges and possible solutions in electron beam melted Ti-based orthopaedic and orthodontic implants. Rapid Prototyping Journal, 28(3), 525-545. DOI 10.1108/RPJ-03-2021-0060
- Yuan, L., Ding, S., & Wen, C. (2019). Additive manufacturing technology for porous metal implant applications and triple minimal surface structures: A review. Bioactive materials, 4, 56-70, https://doi.org/10.1016/j.bioactmat.2018.12.003
- Dehghan-Manshadi, A., Yu, P., Dargusch, M., StJohn, D., & Qian, M. (2020). Metal injection moulding of surgical tools, biomaterials and medical devices: A review. Powder Technology, 364,189-204, DOI 10.1016/j.powtec.2020.01.073
- Im, H., Kim, S. H., Kim, S. H., and Jung, Y. (2018). Skin regeneration with a scaffold of predefined shape and bioactive peptide hydrogels. Tissue Eng. Part A 24, 1518–1530. doi: 10.1089/ten.tea.2017.0489
- Kim, B. S., Kwon, Y. W., Kong, J. S., Park, G. T., Gao, G., Han, W., et al. (2018). 3D cell printing of in vitro stabilized skin model and in vivo pre-vascularized skin patch using tissue-specific extracellular matrix bioink: a step towards advanced skin tissue engineering. Biomaterials 168, 38–53. doi: 10.1016/j.biomaterials.2018.03.040
- Wang, R., Wang, Y., Yao, B., Hu, T., Li, Z., Huang, S., et al. (2019). Beyond 2D: 3D bioprinting for skin regeneration. Int. Wound J. 16, 134–138. doi: 10.1111/iwj.13003
- Gao, Q., Liu, Z., Lin, Z., Qiu, J., Liu, Y., Liu, A., et al. (2017). 3D Bioprinting of vessel-like structures with multilevel fluidic channels. ACS Biomater. Sci. Eng. 3, 399–408. doi: 10.1021/acsbiomaterials.6b00643
- Yang, H., Wei, L., Liu, C., Zhong, W. Y., Li, B., Chen, Y. C., et al. (2019). Engineering human ventricular heart tissue based on macroporous iron oxide scaffolds. Acta Biomater. 88, 540–553. doi: 10.1016/j.actbio.2019.02.024
- Zhang, X., Wang, C., Liao, M., Dai, L., Tang, Y., Zhang, H., et al. (2019). Aligned electrospun cellulose scaffolds coated with rhBMP-2 for both in vitro and in vivo bone tissue engineering. Carbohydr. Polym. 213, 27–38. doi: 10.1016/j.carbpol.2019.02.038
- Obada, D. O., Dauda, E. T., Abifarin, J. K., Dodoo-Arhin, D., & Bansod, N. D. (2020). Mechanical properties of natural hydroxyapatite using low cold compaction pressure: Effect of sintering temperature. Materials Chemistry and Physics, 239, 122099. https://doi.org/10.1016/j.matchemphys.2019.122099
- Wang, L. H., Qiu, Y. Y., Lv, H. J., Si, Y., Liu, L. F., Zhang, Q., et al. (2019). 3D superelastic scaffolds constructed from flexible inorganic nanofibers with selffitting capability and tailorable gradient for bone regeneration. Adv. Funct. Mater. 29:1901407. doi: 10.1002/adfm.201901407
- Qian, Y. Z., Zhou, X. F., Zhang, F. M., Diekwisch, T. G. H., Luan, X. H., and Yang, J. X. (2019). Triple PLGA/PCL scaffold modification including silver impregnation, collagen coating, and electrospinning significantly improve biocompatibility, antimicrobial, and osteogenic for orofacial tissue regeneration. ACS Appl. Mater. Interfaces 11, 37381–37396. doi: 10.1021/acsami.9b07053
- Kim, S., Park, C., Cheon, K. H., Jung, H. D., Song, J., Kim, H. E., et al. (2018).Antibacterial and bioactive properties of stabilized silver on titanium with a nanostructured surface for dental applications. Appl. Surf. Sci. 451, 232–240.doi: 10.1016/j.apsusc.2018.04.270
- Lin, W. J., Qin, L., Qi, H. P., Zhang, D. Y., Zhang, G., Gao, R. L., et al. (2017). Long-term in vivo corrosion behavior, biocompatibility and bioresorption mechanism of a bioresorbable nitrided iron scaffold. Acta Biomater. 54, 454–468. doi: 10.1016/j.actbio.2017.03.020
- Lee, S. H., Lee, K. G., Hwang, J. H., Cho, Y. S., Lee, K. S., Jeong, H. J., et al. (2019).Evaluation of mechanical strength and bone regeneration ability of 3D printed kagome-structure scaffold using rabbit calvarial defect model. Mater. Sci. Eng. C 98, 949–959. doi: 10.1016/j.msec.2019.01.050
- Li, Z., Huang, S., Liu, Y., Yao, B., Hu, T., Shi, H., et al. (2018). Tuning alginategelatin bioink properties by varying solvent and their impact on stem cell behavior. Sci. Rep. 8:8020. doi: 10.1038/s41598-018-26407-26403
- Lin, W. J., Qin, L., Qi, H. P., Zhang, D. Y., Zhang, G., Gao, R. L., et al. (2017). Long-term in vivo corrosion behavior, biocompatibility and bioresorption mechanism of a bioresorbable nitrided iron scaffold. Acta Biomater. 54, 454–468. doi: 10.1016/j.actbio.2017.03.020
- Lin, Z., Wu, S., Liu, X., Qian, S., Chu, P. K., Zheng, Y., et al. (2019). A surfaceengineered multifunctional TiO2 based nano-layer simultaneously elevates the corrosion resistance, osteoconductivity and antimicrobial property of a magnesium alloy. Acta Biomater. 99, 495–513. doi: 10.1016/j.actbio.2019.09.008
- Nakamura, T., Nakano, Y., Usami, H., Okamura, S., Wakabayashi, K., and Yatani, H. (2019). In vitro investigation of fracture load and aging resistance of highspeed sintered monolithic tooth-borne zirconia crowns. J. Prosthodont. Res S1883-1958, 30344–X. doi: 10.1016/j.jpor.2019.07.003 75. I. Antoniac, C. Sinescu & A.Antoniac (2016) Adhesion aspects in biomaterials and medical devices, Journal of Adhesion Science and Technology, 30(16) 1711-1715, https://doi.org/10.1080/01694243.2016.1170959
- Zhang, L. C., & Chen, L. Y. (2019). A review on biomedical titanium alloys: recent progress and prospect. Advanced engineering materials, 21(4), 1801215, DOI: 10.1002/adem.201801215
- Vladescu, A., Vranceanu, D. M., Kulesza, S., Ivanov, A. N., Bramowicz, M., Fedonnikov, A. S., ... & Cotrut, C. M. (2017). Influence of the electrolyte’s pH on the properties of electrochemically deposited hydroxyapatite coating on additively manufactured Ti64 alloy. Scientific reports, 7(1), 16819, https://doi.org/10.1038/s41598-017-16985-z
- Piron, A., Anghelina, F. V., Popa, C., & Despa, V. (2020, December). The study of the mechanism interaction between sparks electric discharges and a AISI 316L biocompatible metallic samples. In IOP Conference Series: Materials Science and Engineering (Vol. 997, No. 1, p. 012027). IOP Publishing, DOI 10.1088/1757-899X/997/1/012027
- Anghelina, F. V., Ungureanu, D. N., Bratu, V., Popescu, I. N., & Rusanescu, C. O. (2013). Fine structure analysis of biocompatible ceramic materials based hydroxyapatite and metallic biomaterials 316L. Applied Surface Science, 285, 65-71.
- Longhi, M., Casagrande, R. B., Kunst, S. R., Santos, V. D., & Ferreira, J. Z. (2019). Obtainment and Characterization of a Silicon alkoxides-based Coating Applied to a Substrate of Stainless Steel 316L for Use in Biomaterials. Materials Research, 22. https://doi.org/10.1590/1980-5373-MR-2018-0514
- Wang, Y., Liu, Z., Zhou, Y., Yang, X., Tang, J., Liu, X.,... & Le, G. (2021). Microstructure and mechanical properties of TiN particles strengthened 316L steel prepared by laser melting deposition process. Materials Science and Engineering : A, 814, 141220. https://doi.org/10.1016/j.msea.2021.141220
- Sathishkumar, S., Sridevi, C., Rajavel, R., & Karthikeyan, P. (2020). Smart flower like MgO/Tb, Eu-substituted hydroxyapatite dual layer coating on 316L SS for enhanced corrosion resistance, antibacterial activity and osteocompatibility. Journal of Science: Advanced Materials and Devices, 5(4), 545-553. https://doi.org/10.1016/j.jsamd.2020.09.007
- Chakkravarthy, V., Manojkumar, P., Lakshmanan, M., Prasad, K. E., Dafale, R., Vadhana, V. C., & Narayan, R. L. (2023). Comparing Bio-Tribocorrosion of Selective Laser Melted Titanium-25% Niobium and Conventionally Manufactured Ti-6Al-4V in Inflammatory Conditions. Journal of Alloys and Compounds, 169852.
- de Lacerda Schickert, S., Jansen, J. A., Bronkhorst, E. M., van den Beucken, J. J., & Leeuwenburgh, S. C. (2020). Stabilizing dental implants with a fiber-reinforced calcium phosphate cement: an in vitro and in vivo study. Acta Biomaterialia, 110, 280-288. https://doi.org/10.1016/j.actbio.2020.03.026
- Bohner, M. (2010). Design of ceramic-based cements and putties for bone graft substitution. Eur Cell Mater, 20(1), 3-10
- Poinescu, A. A., & Ion, R. M. (2018). 316L Stainless steel/hydroxyapatite composite materials for biomedical applications. Hydroxyapatite—advances in composite nanomaterials, biomedical applications and its technological facets. InTech, 137-155. DOI: 10.5772/intechopen.71490
- Mandakhbayar, N., El-Fiqi, A., Lee, J. H., and Kim, H. W. (2019). Evaluation of strontium-doped nanobioactive glass cement for dentin-pulp complex regeneration therapy. ACS Biomater. Sci. Eng. 5, 6117–6126. doi: 10.1021/acsbiomaterials.9b01018
- Chen, S. W., Kawazoe, N., and Chen, G. P. (2017). Biomimetic assembly of vascular endothelial Ccells and muscle cells in microgrooved collagen porous scaffolds. Tissue Eng. Part C Methods 23, 367–376. doi: 10.1089/ten.tec.2017.0088
- Chen, S., Zhang, Q., Nakamoto, T., Kawazoe, N., and Chen, G. (2015). Gelatin scaffolds with controlled pore structure and mechanical property for cartilage tissue engineering. Tissue Eng. Part C Methods 22, 189–198. doi: 10.1089/ten.tec.2015.0281
- Tra Thanh, N., Ho Hieu, M., Tran Minh Phuong, N., Do Bui, Thuan, T., Nguyen Thi, et al. (2018). Optimization and characterization of electrospun polycaprolactone coated with gelatin-silver nanoparticles for wound healing application. Mater. Sci. Eng. C 91, 318–329. doi: 10.1016/j.msec.2018.05.039
- Shi, M., Zhang, H., Song, T., Liu, X. F., Gao, Y. F., Zhou, J. H., et al. (2019). Sustainable dual release of antibiotic and growth factor from pH-responsive uniform alginate composite microparticles to enhance wound healing. ACS applied materials & interfaces, 11(25), 22730-22744
- He, X.; Dziak, R.; Mao, K.; Genco, R.; Swihart, M.; Li, C.; Yang, S. (2013) Integration of a novel injectable nano calcium sulfate/alginate scaffold and BMP2 gene-modified mesenchymal stem cells for bone regeneration. Tissue Eng. Part A, 19, 508–518
- Gu, Y., Zhu, J., Xue, C., Li, Z., Ding, F., Yang, Y., et al. (2014). Chitosan/silk fibroin-based, Schwann cell-derived extracellular matrix-modified scaffolds for bridging rat sciatic nerve gaps. Biomaterials 35, 2253–2263. doi: 10.1016/j.biomaterials.2013.11.087
- Kanimozhi, K.; Khaleel Basha, S.; Sugantha Kumari, V. Processing and characterization of chitosan/PVA and methylcellulose porous scaffolds for tissue engineering. Mater. Sci. Eng. C (2016), 61, 484–491. https://doi.org/10.1016/j.msec.2015.12.084
- Preethi Soundarya, S.; Haritha Menon, A.; Viji Chandran, S.; Selvamurugan, N. (2018) Bone tissue engineering: Scaffold preparation using chitosan and other biomaterials with different design and fabrication techniques. Int. J. Biol. Macromol., 119, 1228–1239. https://doi.org/10.1016/j.ijbiomac.2018.08.056
- Murdock, M.H.; Badylak, S.F. (2017)Biomaterials-based in situ tissue engineering. Curr. Opin. Biomed. Eng. 1, 4–7. https://doi.org/10.1016/j.cobme.2017.01.001
- Asghari, F.; Samiei, M.; Adibkia, K.; Akbarzadeh, A.; Davaran, S. (2017) Biodegradable and biocompatible polymers for tissue engineering application: A review. Artif. Cells Nanomed. Biotechnol. 45, 185–192. https://doi.org/10.3109/21691401.2016.1146731
- Cai, Z., Gan, Y., Bao, C., Wu, W., Wang, X., Zhang, Z., et al. (2019). Photosensitive hydrogel creates favorable biologic niches to promotespinal cord injury repair.Adv. Healthc. Mater. 8:1900013. doi: 10.1002/adhm.201900013
- Parida, P., Behera, A., & Mishra, S. C. (2012). Classification of Biomaterials used in Medicine. http://hdl.handle.net/2080/1761
- Davoodi, E., Montazerian, H., Mirhakimi, A. S., Zhianmanesh, M., Ibhadode, O., Shahabad, S. I., ... & Toyserkani, E. ( 2022). Additively manufactured metallic biomaterials. Bioactive Materials, 15, 214-249, https://doi.org/10.1016/j.bioactmat.2021.12.027
- Biswal, T., BadJena, S. K., & Pradhan, D. (2020). Sustainable biomaterials and their applications: A short review. Materials Today: Proceedings, 30, 274-282, https://doi.org/10.1016/j.matpr.2020.01.437
- Sola, A.; Bertacchini, J.; D’Avella, D.; Anselmi, L.; Maraldi, T.; Marmiroli, S.; Messori, M. (2019). Development of solvent-casting particulate leaching (SCPL) polymer scaffolds as improved three-dimensional supports to mimic the bone marrow niche. Mater. Sci. Eng. C, 96, 153–165.
- Salerno, A.; Oliviero, M.; di Maio, E.; Iannace, S.; Netti, P.A.( 2009) Design of porous polymeric scaffolds by gas foaming of heterogeneous blends. J. Mater. Sci. Mater. Med. 20, 2043–2051. https://doi.org/10.1007/s10856-009-3767-4
- Álvarez, I.; Gutiérrez, C.; Rodríguez, J.F.; de Lucas, A.; García, M.T. (2020) Production of drug-releasing biodegradable microporous scaffold impregnated with gemcitabine using a CO2 foaming process. J. CO2 Util. 41, 101227. https://doi.org/10.1016/j.jcou.2020.101227
- Collins, M.N.; Ren, G.; Young, K.; Pina, S.; Reis, R.L.; Oliveira, J.M. (2021) Scaffold fabrication technologies and structure/function properties in bone tissue engineering. Adv. Funct. Mater. 31, 2010609. https://doi.org/10.1002/adfm.202010609
- Li, Y., Liao, C., and Tjong, C. S. (2019). Electrospun polyvinylidene fluoride-based fibrous scaffolds with piezoelectric characteristics for bone and neural tissue engineering. Nanomaterials 9, :E952. doi: 10.3390/nano9070952
- Ao, C., Niu, Y., Zhang, X., He, X., Zhang, W., and Lu, C. (2017). Fabrication and characterization of electrospun cellulose/nano-hydroxyapatite nanofibers for bone tissue engineering. Int. J. Biol. Macromol. 97, 568–573. doi: 10.1016/j.ijbiomac.2016.12.091
- Drupitha, M. P., Das, B., Parameswaran, R., Dhara, S., Nando, G. B., and Naskar, K. (2018). Hybrid electrospun fibers based on TPU-PDMS and spherical nanohydroxyapatite for bone tissue engineering. Mater. Today Commun. 16,264–273. doi: 10.1016/j.mtcomm.2018.06.013
- Liu, B., Yao, T. T., Ren, L. X., Zhao, Y. H., and Yuan, X. Y. (2018). Antibacterial PCL electrospun membranes containing synthetic polypeptides for biomedical purposes. Colloids Surf. B-Biointerfaces 172, 330–337. doi: 10.1016/j.colsurfb.2018.08.055
- Su, C. J., Tu, M. G., Wei, L. J., Hsu, T. T., Kao, C. T., Chen, T. H., et al. (2017).Calcium silicate/chitosan-coated electrospun poly (lactic acid) fibers for bone tissue engineering. Materials 10:501. doi: 10.3390/ma10050501
- Sun, X., Lang, Q., Zhang, H., Cheng, L., Zhang, Y., Pan, G., et al. (2017).Electrospun photocrosslinkable hydrogel fibrous scaffolds for rapid in vivo vascularized skin flap regeneration. Adv. Funct. Mater. 27:1604617. doi: 10.1002/adfm.201604617
- Lv, Y.; Wang, B.; Liu, G.; Tang, Y.; Lu, E.; Xie, K.; Lan, C.; Liu, J.; Qin, Z.; Wang, L. (2021) Metal material, properties and design methods of porous biomedical scaffolds for additive manufacturing: A review. Front. Bioeng. Biotechnol. 9, 194. https://doi.org/10.3389/fbioe.2021.641130
- Li, J.; Cui, X.; Hooper, G.J.; Lim, K.S.; Woodfield, T.B.F.( 2020) Rational design, bio-functionalization and biological performance of hybrid additive manufactured titanium implants for orthopaedic applications: A review. J. Mech. Behav. Biomed. Mater. 105, 103671. https://doi.org/10.1016/j.jmbbm.2020.103671
- Ning, F.; Cong,W.; Hu, Y.; Wang, H. (2016) Additive manufacturing of carbon fiber-reinforced plastic composites using fused deposition modeling: Effects of process parameters on tensile properties. J. Compos. Mater. 51, 451–462. https://doi.org/10.1177/0021998316646169
- Ciobota, N. D., Gheorghe, G. I., & Despa, V. (2019). Additive Manufacturing As An Important Industry Player For The Next Decades. Scientific Bulletin of'Valahia'University. Materials & Mechanics, 17(16). DOI: 10.2478/bsmm-2019-0010
- Ballarre, J., & Ceré, S. M. (2022). Sol-gel coatings for protection and biofunctionalization of stainless-steel prosthetic intracorporeal devices in Latin-America. Journal of Sol-Gel Science and Technology, 102(1), 96-104. https://doi.org/10.1007/s10971-021-05658-z
- Poinescu, A. A., Radulescu, C., Vasile, B. S., & Ionita, I. (2014). Research regarding sol-gel hydroxyapatite coating on 316L stainless steel. Revista de Chimie, 65(10), 1245-1248.
- Arya, S.; Mahajan, P.; Mahajan, S.; Khosla, A.; Datt, R.; Gupta, V.; Young, S.-J.; Oruganti, S.K. (2021) Review— influence of processing parameters to control morphology and optical properties of sol-gel synthesized ZnO nanoparticles. ECS J. Solid State Sci. Technol. 10, 23002. DOI 10.1149/2162-8777/abe095
- Zhang, J.; Zhou, J.; Huang, X.;Wang, L.; Liu, G.; Cheng, J.( 2020) In situ preparation of hierarchically porous _-tricalcium phosphate bioceramic scaffolds by the sol-gel method combined with F127. Ceram. Int. 46, 6396–6405. https://doi.org/10.1016/j.ceramint.2019.11.117
- Rodriguez-Contreras, A., Punset, M., Calero, J. A., Gil, F. J., Ruperez, E., & Manero, J. M. (2021). Powder metallurgy with space holder for porous titanium implants: A review. Journal of Materials Science & Technology, 76, 129-149. https://doi.org/10.1016/j.jmst.2020.11.005
- Rupérez, E., Manero, J. M., Riccardi, K., Li, Y., Aparicio, C., & Gil, F. J. (2015). Development of tantalum scaffold for orthopedic applications produced by space-holder method. Materials & Design, 83, 112-119. https://doi.org/10.1016/j.matdes.2015.05.067
- Ali, M., Pages, E., Ducom, A., Fontaine, A., and Guillemot, F. (2014). Controlling laser-induced jet formation for bioprinting mesenchymal stem cells with high viability and high resolution. Biofabrication 6:045001. doi: 10.1088/1758-5082/6/4/045001
- Du, M., Chen, B., Meng, Q., Liu, S., Zheng, X., Zhang, C., et al. (2015). 3D bioprinting of BMSC-laden methacrylamide gelatin scaffolds with CBDBMP2-collagen microfibers. Biofabrication 7:044104. doi: 10.1088/1758-5090/7/4/044104
- Ye, Z., Sang, T., Li, K., Fischer, N. G., Mutreja, I., Echeverría, C., ... & Aparicio, C. (2022). Hybrid nanocoatings of self-assembled organic-inorganic amphiphiles for prevention of implant infections. Acta biomaterialia, 140, 338-349. https://doi.org/10.1016/j.actbio.2021.12.008
- Ye, Z., Zhu, X., Mutreja, I., Boda, S. K., Fischer, N. G., Zhang, A., ... & Aparicio, C. (2021). Biomimetic mineralized hybrid scaffolds with antimicrobial peptides. Bioactive Materials, 6(8), 2250-2260. https://doi.org/10.1016/j.bioactmat.2020.12.029
- Choudhary, R., Venkatraman, S. K., Bulygina, I., Senatov, F., Kaloshkin, S., Anisimova, N., ... & Swamiappan, S. (2021). Biomineralization, dissolution and cellular studies of silicate bioceramics prepared from eggshell and rice husk. Materials Science and Engineering: C, 118, 111456. https://doi.org/10.1016/j.msec.2020.111456
- Unal, S., Oktar, F. N., Mahirogullari, M., & Gunduz, O. (2021). Bone structure and formation: A new perspective. In Bioceramics (pp. 175-193). Elsevier. doi: 10.1016/B978-0-08-102999-2.00009-0
- Gao, G., Hubbell, K., Schilling, A. F., Dai, G., and Cui, X. (2017). “Bioprinting cartilage tissue from mesenchymal stem cells and PEG hydrogel,” in 3D cell Culture: Methods and Protocols, ed. Z. Koledova (New York, NY: Springer New York), 391–398.
- Costantini, M.; Barbetta, A. 6—Gas foaming technologies for 3D scaffold engineering. In Functional 3D Tissue Engineering Scaffolds;Deng, Y., Kuiper, J.B.T.-F., Eds.;Woodhead Publishing: Cambridge, UK, 2018; pp. 127–149, ISBN 978-0-08-100979-6
- Fereshteh, Z. Freeze-Drying Technologies for 3D Scaffold Engineering. In Functional 3D Tissue Engineering Scaffolds: Materials, Technologies, and Applications; Woodhead Publishing: Cambridge, UK, 2018; pp. 151–174, ISBN 9780081009796
- Gao, G., Hubbell, K., Schilling, A. F., Dai, G., and Cui, X. (2017). “Bioprinting cartilage tissue from mesenchymal stem cells and PEG hydrogel,” in 3D cell Culture: Methods and Protocols, ed. Z. Koledova (New York, NY: Springer New York), 391–398