References
- Petre I C, Popescu I N 2017 The Phenomenological Analysis of the Nature of the Friction, from Theoretical and Experimental Point of View of AL-AL2O3-Graphite Composite /Cast Iron „Pin On Disc” Sliding System, International Journal of Mechatronics and Applied Mechanics Issue 2 pp 40-47
- I.N. Popescu, I.C.Petre, V. Despa – Analytical and experimental studies on wear behaviour of cast and heat treated AlSi12CuMgNi and AlZn6MgCu matrix composites reinforced with ceramic particles, under sliding conditions In book: Proceedings of the International Conference of MECHATRONICS & CYBER- MIXMECHATRONICS ICOMECYME, Bucharest, Romania, September 6th-7th, 2018,
- Petre I., Stoian E. V., Enescu M. C., - Tribological behaviour of a thermoplastic material under the action a conic penetrator in sliding movement, Revista materiale plastice, vol 58, no. 1, p. 27-33, 2021
- Briscoe B., et all - Scratch map for polymer, Wear 200, pg. 137 - 147, 1996.
- Petre I. - Determining the functional and material properties needed for abrasive wear prediction, 7th International Conference on Advanced Concepts in Mechanical Engineering, IOP Conf. Series: Materials Science and Engineering 147 (2016) 012018
- Petre I. – Wear Model of sliding motion flat surfaces used in mechanical engineering, Applied Machanics and Material Vol 658 (2014) pp 345-350, ACME2014, online available since 2014/oct/01
- Petre I, Carstoiu A - Determining of the wear traces for sliding couplings, Applied Mechanics and Materials Vol. 811 (2015) pp 80-84, ISSN web 1662-7482, ISSN print 1660-9336 Trans Tech Publications, Switzerland,
- Johnson K. L. - Contact mechanics and the wear of metals, Wear 190, pg. 162 - 170, 1995.
- Kopalinsky E. M., Oxley P. L. B. - Explaining the mechanics of metallic sliding friction and wear in terms of slip line field models of asperity deformation, Wear 290, pg. 145 - 154, 1995.
- Torrance A. A. - The influence of the surface deformation on mechanical wear, Wear 200, pg. 45-54, 1996.
- Xie Y., Williams J. A. - The prediction of friction and wear when a soft surface slides against a harder rough surface, Wear 196, pg. 21 - 34, 1996.
- Challin J.M. and Oxley P. L. - An explanation of different regimes of friction and wear using asperity deformation models, Wear 53, pg. 229 - 243, 1979.
- Torrance A. A., Buckley T. R. - A slip line field model of abrasive wear, Wear 196, pg. 35 - 45, 1996.
- https://www.rezmat.ro/caracteristici-mecanice
- Petre I.C., Catangiu A., Popescu I.N., Ungureanu D. N., Negrea A., Poinesc A.A., Enescu M.C., Stoian E.V., Despa V. – Tribometric device for determining friction forces and friction coefficients in the case of dry friction materials, Scientific Bulletin of Valahia University -Materials and Mechanics –Vol. 16, No. 15, p.17-20, 2018