Studies on the Influence of Methane Gas Bubbling of Metal Alloys on the Casting Properties

Elena Valentina Stoian; Cristiana Maria Enescu; Ivona Camelia Petre

doi:10.2478/bsmm-2024-0012

.blurhash-client-img { display: none !important; }

Studies on the Influence of Methane Gas Bubbling of Metal Alloys on the Casting Properties

Scientific Bulletin of Valahia University - Materials and Mechanics

Volume 20 (2024): Issue 23 (October 2024)

By: Elena Valentina Stoian, Cristiana Maria Enescu and Ivona Camelia Petre

Open Access

|Nov 2024

Abstract

The purpose of using bubbling in the case of metal alloys was to increase the mechanical resistance, to improve the casting properties as well as to observe the changes brought by gases on the structure. During bubbling, especially hydrogen and oxygen are removed, which obviously leads to the improvement of metal alloys. The influence of bubbling on the casting properties is explained by the structural changes that occur in the cast alloys. Therefore, bubbling with methane gas is a safe means of improving the quality of cast parts, ensuring at the same time the increase of casting properties of alloys.

References

Cast Irons - Properties and Applications Semih Genculu, P.E.
Search in Google Scholar Back to article
Dawson, S., 2003. Cast Iron Alloy and Method Making the Same, US Patent 6,613,274 B2.
Search in Google Scholar Back to article
Dawson, S., 2001. A Brief History of Foundry, Engine Technology.
Search in Google Scholar Back to article
Ateia A. Alaa, “Effect of Heat Treatments on Thermal Conductivity and Mechanical PropMechanical and Material Engineering, Vol. 10,No. 1, 2010.
Search in Google Scholar Back to article
Eperjesi S.,J. Malik, I. Vaskova, and D. Fecko,2015,”Increasing of Utility Properties of Gray Cast Iron Castings with Heat Treatment”Archives of Foundary Engineeerties of brake rotor material”,The Iraqi Journal .
Search in Google Scholar Back to article
H. Takeda, K. Asano and H. Yoneda: Int. J. Cast Met. Res. Vol. 21 (2008), p. 81-85
Search in Google Scholar Back to article
The Editors of Encyclopaedia Britannica (2020), “Cast Iron”, britannica, Retrieved 17/1/2022. Edited.
Search in Google Scholar Back to article
Ojo Saliu Seidu,Bolarinwa Johnson Kutelu,2013,”Influence of Heat Treatment on the Microstructure and Hardness Property of Inoculated Gray Cast Iron”,International Journal of Engineering &Technology,Vol.3,No.9,2013.
Search in Google Scholar Back to article
G.S. Cho, K.H. Choe, K.W. Lee and A. Ikenaga: J. Mater. Sci. Tech. Vol. 23 (2007), p. 97-101.
Search in Google Scholar Back to article
Ateia A. Alaa, “Effect of Heat Treatments on Thermal Conductivity and Mechanical PropMechanical and Material Engineering, Vol. 10,No. 1, 2010.
Search in Google Scholar Back to article
Sofroni, L., Ripoșan, I., Brabie, V. și Chișamera, M. Turnarea fontei. Editura Didactică și Pedagogică, București. 1985.
Search in Google Scholar Back to article
Joan Serrallach, Jacques Lacaze, Jon Sertucha, Ramón Suárez, Adrián Monzón, Effect of Selected Alloying Elements on Mechanical Properties of Pearlitic Nodular Cast Irons, Key Engineering Materials Vol. 457 (2011) pp 361-366.
Search in Google Scholar Back to article
Olumide A. Towoju, Felix A. Ishola, Numerical investigation of the variation of a uniformly dimensioned cast iron property using cooling channels, Materials Today: Proceedings, Volume 46, Part 1, 2021, Pages 279-284.
Search in Google Scholar Back to article
E.V. Stoian, V. Bratu, C.M. Enescu, D.N. Ungureanu, Researches regarding the influence of alloying elements on the mechanical properties of lamellar graphite cast iron, Sci. Bull. VALAHIA Univ.– Mater. Mech. 16 (15) (2018) 1116, https://doi.org/10.1515/bsmm-2018-0012.
Search in Google Scholar Back to article
L.Collini,G.Nicoletto,R.Konecˇná,Microstructure and mechanical properties of pearlitic gray castiron,Mater.Sci.Eng.,A488(1-2)(2008)529–539.
Search in Google Scholar Back to article
M.M. Haque, J. Mater. Process Technol. 191 (2007) 360–363.
Search in Google Scholar Back to article
M.M. Jabbari Behnam, P. Davami, N. Varahram, Effect of cooling rate on microstructure and mechanical properties of gray cast iron, Mater. Sci. Eng., A 528 (2) (2010) 583–588.
Search in Google Scholar Back to article
G. Wang, X. Chen, Y. Li, Z. Liu, Effects of Inoculation on the Pearlitic Gray Cast Iron with High Thermal Conductivity and Tensile Strength, Materials (Basel, Switzerland), 11 (10) (2018), doi: 10.3390/ma11101876.
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.2478/bsmm-2024-0012 | Journal eISSN: 2537-3161 | Journal ISSN: 1844-1076

Journal RSS Feed

Language: English

Page range: 15 - 18

Published on: Nov 9, 2024

Published by: Valahia University of Targoviste

In partnership with: Paradigm Publishing Services

Publication frequency: 2 issues per year

Keywords:

Cast iron,

mechanical properties,

bubbling,

methane gas

Related subjects:

Engineering,

Mechanical engineering,

Fundamentals of mechanical engineering,

Thermodynamics,

Bioengineering and biomedical engineering,

Biomaterials

© 2024 Elena Valentina Stoian, Cristiana Maria Enescu, Ivona Camelia Petre, published by Valahia University of Targoviste
This work is licensed under the Creative Commons Attribution 4.0 License.

Volume 20 (2024): Issue 23 (October 2024)