Analysis of Oxidic Materials in the Continuous Molding of Alloys

Florin Marian Toma; Elena Valentina Stoian; Nicolae Angelescu; Dan Nicolae Ungureanu

doi:10.2478/bsmm-2024-0013

.blurhash-client-img { display: none !important; }

Analysis of Oxidic Materials in the Continuous Molding of Alloys

Scientific Bulletin of Valahia University - Materials and Mechanics

Volume 20 (2024): Issue 23 (October 2024)

By: Florin Marian Toma, Elena Valentina Stoian, Nicolae Angelescu and Dan Nicolae Ungureanu

Open Access

|Nov 2024

Abstract

The aim of the work was to obtain advanced oxide materials, obtained through technologies compatible with sustainable development materials. These materials are used in special operating conditions, such as in the case of continuous steel casting, where there is a temperature difference of over 10000C between the mold wall and the steel crust. These are the lubricating powders for the crystallizer.

References

Assar M. B., Dauby P.H., Lawson G.D. 2001. Voyage dans une lingotière de coulée continue, Revue de Métallurgie - CIT, (April, 2001): 353-366.
Search in Google Scholar Back to article
Stoian E. V., Bratu V. 2018. Analysis of internal defects appeared in the continuous casting, Scient Bull Valahia Univ Mater & Mechan, 16 (14), DOI 10.1515/bsmm-2018-0005, 2018.
Search in Google Scholar Back to article
Carlos-Pinheiro A. M. 1997. Mould thermal response, billet surface quality and mould-flux behaviour in the continuous casting of steel billets with powder lubrications. Doctorate Thesis, The University of British Columbia, (December, 1997).
Search in Google Scholar Back to article
Tripşa I., Pumnea C. 1984. Retopirea şi rafinarea oţelurilor, Editura tehnică, Bucureşti, 1984.
Search in Google Scholar Back to article
Toma F. M. 2019. Work of dissertation, Valahia University from Târgoviște, 2019.
Search in Google Scholar Back to article
Arianit Reka A., et al. 2019. Chemical, mineralogical and structural features of native and expanded perlite from Macedonia. Geologia Croatica, 72 (3), 2019.
Search in Google Scholar Back to article
Baia Mare Museum of Mineralogy. 2019. Catalog, (November, 2019).
Search in Google Scholar Back to article
www.tufgroup.com. 2020.Casting Fluxes And Covering Compounds - TUF Metallurgical . xxx. 2019. Stollberg Lists, 2019.
Search in Google Scholar Back to article
Bratu V., et al. 2014. Mathematical model of solidification process in steel continuous casting taking into account the convective heat transfer at liquid–solid interface, Computational materials science, Vol.94, p.2-7, 2014, Elsevier.
Search in Google Scholar Back to article
Toma F. M. 2019. Doctorate Progress Report I, Valahia University from Târgoviște, 2019.
Search in Google Scholar Back to article
Toma F. M. 2020. Doctorate Progress Report II, Valahia University from Târgoviște, 2020.
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.2478/bsmm-2024-0013 | Journal eISSN: 2537-3161 | Journal ISSN: 1844-1076

Journal RSS Feed

Language: English

Page range: 19 - 22

Published on: Nov 9, 2024

Published by: Valahia University of Targoviste

In partnership with: Paradigm Publishing Services

Publication frequency: 2 issues per year

Keywords:

Related subjects:

Mechanical engineering,

Fundamentals of mechanical engineering,

Thermodynamics,

Bioengineering and biomedical engineering,

Biomaterials

© 2024 Florin Marian Toma, Elena Valentina Stoian, Nicolae Angelescu, Dan Nicolae Ungureanu, published by Valahia University of Targoviste
This work is licensed under the Creative Commons Attribution 4.0 License.

Volume 20 (2024): Issue 23 (October 2024)