Skip to main content
Have a personal or library account? Click to login
A Case Study on the Effect of Printing Temperature on the Tensile Strength of 3D Printed Parts with PLA Material Cover

A Case Study on the Effect of Printing Temperature on the Tensile Strength of 3D Printed Parts with PLA Material

The Scientific Bulletin of Electrical Engineering Faculty
Volume 21 (2021): Issue 2 (December 2021)
By: I. Iancu and  M.G. Ionita  
Open Access
|Feb 2022
Metrics

Metrics

DOI: https://doi.org/10.2478/sbeef-2021-0022 | Journal eISSN: 2286-2455 | Journal ISSN: 1843-6188
Journal RSS Feed
Language: English
Page range: 49 - 52
Published on: Feb 2, 2022
Published by: Valahia University of Targoviste
In partnership with: Paradigm Publishing Services
Publication frequency: 2 issues per year
Keywords:
3D printer,
polylactic acid material,
tensile strength,
filament fabrication technology
Related subjects:
Engineering,
Electrical engineering,
Fundamentals of electrical engineering,
Bioengineering and biomedical engineering,
Biomedical electronics

© 2022 I. Iancu, M.G. Ionita, published by Valahia University of Targoviste
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Volume 21 (2021): Issue 2 (December 2021)
Previous article
Next article