Have a personal or library account? Click to login
Mathematical Modelling and Numerical Simulation of Mass Transfer During Deep-Fat Frying of Plantain (Musa paradisiacal AAB) Chips (ipekere) Cover

Mathematical Modelling and Numerical Simulation of Mass Transfer During Deep-Fat Frying of Plantain (Musa paradisiacal AAB) Chips (ipekere)

Open Access
|Dec 2020

References

  1. 1. Adedeji, A. A. and Ngadi, M. (2018). Impact of freezing method, frying and storage on fat absorption kinetics and structural changes of parfried potato. Journal of Food Engineering, 218: 24-32. DOI: 10.1016/j.jfoodeng.2017.08.024.10.1016/j.jfoodeng.2017.08.024
  2. 2. Adedeji, A. A. and Ngadi, M. (2011). Porosity determination of deep-fat-fried coatings using pycnometer (Fried batter porosity determination by pycnometer). International Journal of Food Science and Technology, 46: 1266-1275. DOI: 10.1111/j.1365-2621.2011.02631.x.10.1111/j.1365-2621.2011.02631.x
  3. 3. Adedeji, A. A., Ngadi, M. O. and Raghavan, G. S. V. (2009). Kinetics of mass transfer in microwave precooked and deep-fat fried chicken nuggets. Journal of Food Engineering, 91: 146-153. DOI: 10.1016/j.jfoodeng.2008.08.018.10.1016/j.jfoodeng.2008.08.018
  4. 4. Adeyanju, J. A., Olajide, J. O. and Adedeji, A. A. (2016). Development of optimum operating conditions for quality attributes in deep-fat frying of dodo produced from plantain using response surface methodology. Food and Nutrition Sciences, 7: 1423-1433. DOI: 10.4236/fns.2016.714129.10.4236/fns.2016.714129
  5. 5. AOAC. (2000). Official methods of analysis (17th ed). Association of Official Analytical Chemists. Washington DC.
  6. 6. Ateba, P. and Mittal, G. S. (1994). Modelling the deep-fat frying of beef meatballs. International Journal of Food Science and Technology, 29: 429–440. DOI: 10.1111/j.1365-2621.1994.tb02084.x.10.1111/j.1365-2621.1994.tb02084.x
  7. 7. Aurore, G., Berthe, P. and Louis F. (2009). Bananas, raw materials for making processed food products: A Review. Trends in Food Science and Technology, 20(2): 78-91. DOI: 10.1016/j.tifs.2008.10.003.10.1016/j.tifs.2008.10.003
  8. 8. Azoubel, P. M. and Murr, F. E. X. (2002). Effect of sugar syrup concentration and temperature on the rate of osmotic dehydration of Apple. Journal of Food Science and Technology, 27(5):205–201. DOI: 10.1111/j.1365-2621.2008.01783.x.10.1111/j.1365-2621.2008.01783.x
  9. 9. Bouchin, P., Aguilera, J. and Pyle, D. (2003). Structure oil absorption relationships during deep-fat frying. Journal of Food Science, 68: 2711–2716. DOI: 10.1111/j.13652621.2003.tb05793.x10.1111/j.1365-2621.2003.tb05793.x
  10. 10. Bravo, J., Sanjuan, N., Ruales, J. and Mulet, A. (2009). Modelling the dehydration of apple slices by deep fat frying. Drying Technology, 27: 782–786. DOI: 10.1080/07373930902828187.10.1080/07373930902828187
  11. 11. Chen, Y., and Moreira, R. G. (1997). Modelling of a batch deep-fat frying process for Tortilla chips. Food and Bioproducts Processing, 75(3):181–190. DOI: 10.1205/096030897531531.10.1205/096030897531531
  12. 12. Demirel, D. and Turhan, M. (2003). Air drying behaviour of Dwarf Cavendish and Gros Michel plantain slices. Journal of Food Engineering, 59(1): 1–11. DOI: 10.1016/S0260-8774(02)-00423-5.10.1016/S0260-8774(02)00423-5
  13. 13. Dobarganes, M. C, Velasco, J. and Dieffenbache, A. (2000). Determination of polar compounds polymerized and oxidized triacylglycerols, and diacylglycerols in oils and fats. Pure and Applied Chemistry, 72(8): 1563–1575. DOI: 10.1351/pac200072081563.10.1351/pac200072081563
  14. 14. FAO (2013). Statistical Yearbook, Statistics Division, Food and Agriculture Organisation, Rome, Italy.
  15. 15. Farkas, B. E., Singh, R. P. and Rumsey, T. R. (1996). Modelling heat and mass transfer in immersion frying: model development. Journal of Food Engineering, 29(2): 211–226. DOI: 10.1016/0260-8774(95)00072-0.10.1016/0260-8774(95)00072-0
  16. 16. Gamble, M. H., Rice, P. and Selman, J. D. (1987). Relationship between oil uptake and moisture loss during frying of potato slices. International Journal of Food Science and Technology, 22(3): 2332–2341. DOI: 10.1111/j.1365-2621.1987.tb00483.x.10.1111/j.1365-2621.1987.tb00483.x
  17. 17. Garcia, M. A., Ferrero, C., Bertola, N., Martino, M. and Zaritzky, N. (2002). Edible coatings from cellulose derivatives to reduce oil uptake in fried products. Innovative Food Science and Emerging Technologies, 3(4): 391–397. DOI: 10.1016/S1466-8564(02)00050-4.10.1016/S1466-8564(02)00050-4
  18. 18. Innawong, B. (2001). Improving fried product and frying oil quality using nitrogen gas in a pressure frying system. (Ph.D). Virginia Polytechnic Institute and State University, Blacksburg, Virginia.
  19. 19. Kanazawa, K. and Sakakibara, H. (2000). High content of dopamine, a strong antioxidant, in Cavendish plantain. Journal of Agricultural and Food Chemistry, 48(3): 844–848. DOI: 10.1021/jf9909860.10.1021/jf9909860
  20. 20. Kassama, L. and Ngadi, M. (2005). Pore development and moisture transfer in chicken meat during deep-fat frying. Journal of Drying Technology, 23(4): 907–923. DOI: 10.1081/DRT-200054239.10.1081/DRT-200054239
  21. 21. Krokida, M. K., Oreopoulou, V., Maroulis, Z. B. and Marinos-Kouris, D. (2001). Effect of osmotic dehydration pretreatment on quality of French fries. Journal of Food Engineering, 49(4): 339–345. DOI: 10.1016/S0260-8774(00)00232-6.10.1016/S0260-8774(00)00232-6
  22. 22. Manjunatha, S. S., Ravi, N., Negi, P. S., Raju, P. S. and Bawa, A. S. (2012). Kinetics of moisture loss and oil uptake during deep fat frying of Gethi (Dioscorea kamoonensis Kunth) strips. Journal of Food Science and Technology. DOI: 10.1007/s13197-012-0841-6.10.1007/s13197-012-0841-6
  23. 23. Marquez, G. and Anon, M. (1986). Influence of reducing sugars and amino acid in the colour development of fried potatoes. Journal of Food Science, 51(1): 157–160. DOI: 10.1111/j.1365-2621.1986.tb10859.x.10.1111/j.1365-2621.1986.tb10859.x
  24. 24. Mellema, M. (2003). Mechanism and reduction of fat uptake in deep-fat fried foods. Trends in Food Science and Technology, 14(9): 364–373.DOI: 10.1016/S0924-2244(03)00050-5.10.1016/S0924-2244(03)00050-5
  25. 25. Mohapatra, D., Mishra, S. and Sutar, N. (2010). Plantain and its byproduct utilization: An overview. Journal of Scientific and Industrial Research, 69, 323–329.
  26. 26. Moreira, R. G, Sun, X. and Chen, Y. (1997). Factors affecting oil uptake in tortilla chips in deep-fat frying. Journal of Food Engineering, 31(4), 485–98. DOI: 10.1016/S0260-8774(96)00088-x.10.1016/S0260-8774(96)00088-X
  27. 27. Ngadi, M. O., Watts, K. C. and Correia, L. R. (1997). Finite element modelling of heat and mass transfer during deep-fat frying of chicken drums. Journal of Food Engineering, 32(1): 11–20. DOI: 10.1016/S0260-8774(97)00095-2.10.1016/S0260-8774(97)00095-2
  28. 28. Pedreschi, F. (2012). Frying of potatoes: Physical, chemical and microstructural changes. Drying Technology, 30(7): 707–725. DOI: 10.1080/07373937.2012.663845.10.1080/07373937.2012.663845
  29. 29. Vitrac, O., Dufour, D., Trystram, G. and Raoult-Wack, A. (2002). Characterization of heat and mass transfer during deep-fat frying and its effect on cassava chip quality. Journal of Food Engineering, 53(2): 161–176. DOI: 10.1016/S0260-8774(01)00153-4.10.1016/S0260-8774(01)00153-4
  30. 30. Yamsaengsung, R. and Moreira, R. G. (2002). Modelling the transport phenomena and structural changes during deep fat frying, Part I: model development. Journal of Food Engineering, 53(1): 1–10. DOI: 10.1016/S0260-8774(01)00134-0.10.1016/S0260-8774(01)00134-0
  31. 31. Ziaiifar, A. M., Achir, N., Courtois, F., Trezzani, I. and Trystram, G. (2008). Review on mechanisms, conditions, and factors involved in the oil uptake phenomenon during deep-fat frying process. International Journal of Food Science and Technology, 43(8): 1410–23. DOI: 10.1111/j.1365-2621.2007.01664.x.10.1111/j.1365-2621.2007.01664.x
  32. 32. Zhan, T., Li, J., Ding, Z. and Fan, L. (2015). Effects of initial moisture content on the oil absorption behaviour of potato chips during frying process, Food and Bioprocess Technology, 9(2): DOI: 10.1007/s11947-015-1625-6.10.1007/s11947-015-1625-6
DOI: https://doi.org/10.2478/aucft-2020-0022 | Journal eISSN: 2344-150X | Journal ISSN: 2344-1496
Language: English
Page range: 247 - 256
Submitted on: May 26, 2020
|
Accepted on: Aug 15, 2020
|
Published on: Dec 24, 2020
In partnership with: Paradigm Publishing Services
Publication frequency: 2 issues per year

© 2020 James Abiodun Adeyanju, John Oluranti Olajide, Emmanuel Olusola Oke, Akinbode Adeyemi Adedeji, published by Lucian Blaga University of Sibiu
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.